Calculating Attack Dmg Pathfinder
|
Re: Help with calculating monster CR The book doesn't say about the first question but I'd err on the side of caution and give it an effective 84 HP. Although my main reasoning for that judgement is the fact that the HP by CR listings on the table are so very, very wrong and scale a lot faster than they should. Attack rolls are further modified by bonuses such as circumstance, competence, enhancement, insight, luck, moral, profane, size, and sacred. Attacks receive a +2 flanking bonus when at least two players attack that same target with melee weapons.
Combat is the resolution of conflict by viciously depriving your opponents of breath or the equivalent thereof.
The most general combat mechanic in Pathfinder: Kingmaker is the following:
When an attack is made, the computer will generate a random number between 1 and 20 and add the attacker's attack bonuses. If this totaled number is at least equal to the defender's Armor Class then the attack hits.
Attack values and Armor Class both can have a large number of modifiers depending on the characters' attributes like Strength or Dexterity, their character levels and class, their feats, their equipment, and any present magical or physical effects (such as their condition).
It is important to note that physical equipment and temporary magical effects do not stack when providing the same type of stat bonus. For instance the spells 'Mage Armor' or 'Shield' do not work if already equipped with a better armor or shield, though they do have additional useful effects against ghostly creatures.
Attacking[editedit source]
When a character attempts to damage an opponent with a weapon, perform a combat maneuver, or complete a hostile touch spell, the character must first succeed at an attack roll. Opponents must be within the range or the weapon or spell before an attack is performed.
Melee attacks are made with a d20 roll and adding their base attack bonus. The most common modifiers are the attacker's Strength, masterwork or magical equipment, or spells.
Ranged attacks function the same as melee attacks except that the attacker's Dexterity modifier is added to the attack roll instead of the Strength modifier.
There is also one other common attack, a touch attack. Most often used as part of a combat spell, these attacks need only make contact, not penetrate armor, so most bonuses to armor class due to having armor are ignored. Only those bonuses that make make it easier to evade the touch are useful. Like normal attacks, they come in both melee and ranged version, using Strength modifier and Dexterity modifier, respectively.
If the attack total meets or exceeds the opponent's armor class or combat maneuver defense, then the attack succeeds. Effects are applied, including damage, on a successful attack roll. An attack roll always succeeds when the die result is 20 (before modifiers) and always fails if it is 1 (before any modifiers), so there is always at least a 5% chance to hit or miss, regardless of anything else.
Attack rolls are further modified by bonuses such as circumstance, competence, enhancement, insight, luck, moral, profane, size, and sacred. Attacks receive a +2 flanking bonus when at least two players attack that same target with melee weapons. Attack rolls are also affected by conditions such as blinded, dazzled, entangled, flanking, grappled, prone, sickened, or shaken.
While similar in idea, combat maneuvers have a different mechanisms. Consult their article for more details.
Mac os high sierra dmg download google drive. Jun 28, 2019 The dmg already includes clover bootloader, so you can restore the image and install the OS on your pc. Here in HackintoshPro, we have a much detailed guide on how to install macOS high sierra on pc. Download macOS high sierra from mega. While macOS Mojave is released macOS high sierra still can be download and installed from the app. Dec 08, 2018 MacOS High Sierra 10.13.6 dmg for mac free download full version. MacOS High Sierra 10.13.6(17G65) offline installer complete setup for mac OS with direct link supplemental update for macbook pro (2018). Description MacOS High Sierra 10.13.6 Dmg For Mac + Overview.
Damage[editedit source]
Melee weapon damage is based on the roll of the weapon's damage die plus the character's strength modifier. When using a two-handed weapon, one and a half times the strength modifier is used instead. Secondary weapon attacks from secondary natural weapons and weapons held in the off-hand only apply half of the strength modifier.
Defense[editedit source]
There are a variety of combat defenses, depending on the nature and source of the attack.
Armor Class, also known as AC, represents how hard it is for opponents to land a damaging blow on the target. It’s the minimum attack roll result that a character needs to hit. Armor class is split into three variations, based on the nature of the attack. The standard armor class is used against basic attacks and encompasses bonuses from all sources. Flat-footed AC is the defense value a target has when they are denied the ability to evade an attack, such as being unaware of the assault, sleeping, or entangled by a rope. Touch AC is used when the attack does not need to pierce the target's physical protections to damage or otherwise take effect.
Saving throws represent a character's ability to reduce or prevent the effects spells and special abilities. The subject rolls a d20 and adds their saving throw bonus. If the saving throw result is at least the DC of the effect, then the effect is reduced or negated as described by the effect.
Damage reduction, or DR, is the amount of damage the creature ignores from normal attacks. Usually, a certain type of weapon can overcome this reduction. This information is separated from the damage reduction number by a slash. For example, DR 5/magic means that a creature takes 5 less points of damage from all weapons that are not magic. If a dash follows the slash (such as 10/-), then it always effective. Damage resistance is ineffective against any sort of energy damage, even if it is delivered with a standard attack or by an magical weapon.
Energy resistance is similar to damage reduction, except for certain types of energy. Each resistance ability is defined by what energy type it resists and how many points of damage are resisted (e.g. Fire resistance 10 reduces fire damage taken by 10). It doesn’t matter whether the damage has a mundane or magical source.
More details on these subjects can be found in their individual articles.
Special Cases[editedit source]
Critical Hits[editedit source]
When the attack d20 result, without any modifiers, is within the threat range of the weapon use, the attack then something called a critical threat is achieved. To determine the outcome, a second attack rolls is made using all the same bonuses as the first. If the second roll would hit the target, then the attack threat is said to be 'confirmed' and you achieve what's known as a critical hit. Unfortunately, it should be noted that the critical hit will still fail if the first roll, despite being in the critical threat range, would have missed the target normally.
The threat range and critical multiplier are inherent to the type of weapon used, though it can be changed sometimes through the use of special feats, abilities, or spells. Unless otherwise noted, weapons and spells have a critical threat range of 20 and a critical multiplier of 2, shorted as '20/x2'.
- Example: A standard scimitar has a threat range of 18-20 with a critical multiplier of x2. Say if the dice roll is an 18 and the attack bonus is +6. The 18 on the dice alone is enough to trigger a threat, unless the targets armor class is more than (18+6=24), which would be a miss with most other weapons. If there is a threat and a hit, then a second roll is made with the +6 bonus, and if that second roll is good enough to hit, then it's a critical hit. Note that this second roll does not have to be within the critical threat range of 18-20.
When a critical hit occurs, the weapon damage and other non-dice based bonuses are multiplied by the weapon's critical multiplier.
- Example: Our example weapon is the previously mentioned scimitar with a critical multiplier of x2, but this time it's a +1 weapon with the elemental trait of flaming which adds +1d6 fire damage. When a critical hit occurs, the standard damage of 1d6 would be calculated, and the attackers Strength bonus and +1 enhancement bonus would be added, and the result would be multiplied by the scimitar's x2 critical multiplier. Only then would any extra dice of damage, such as the +1d6 flaming damage or any sneak attack dice, be added, and it would not be multiplied.
Combat Maneuvers[editedit source]
Combat Maneuvers are special attacks and tricks that have additional effects beyond pure damage. See Combat Maneuvers for a detailed explanation.
|
Combat is the resolution of conflict by viciously depriving your opponents of breath or the equivalent thereof.
The most general combat mechanic in Pathfinder: Kingmaker is the following:
When an attack is made, the computer will generate a random number between 1 and 20 and add the attacker's attack bonuses. If this totaled number is at least equal to the defender's Armor Class then the attack hits.
Attack values and Armor Class both can have a large number of modifiers depending on the characters' attributes like Strength or Dexterity, their character levels and class, their feats, their equipment, and any present magical or physical effects (such as their condition).
It is important to note that physical equipment and temporary magical effects do not stack when providing the same type of stat bonus. For instance the spells 'Mage Armor' or 'Shield' do not work if already equipped with a better armor or shield, though they do have additional useful effects against ghostly creatures.
Attacking[editedit source]
When a character attempts to damage an opponent with a weapon, perform a combat maneuver, or complete a hostile touch spell, the character must first succeed at an attack roll. Opponents must be within the range or the weapon or spell before an attack is performed.
Melee attacks are made with a d20 roll and adding their base attack bonus. The most common modifiers are the attacker's Strength, masterwork or magical equipment, or spells.
Ranged attacks function the same as melee attacks except that the attacker's Dexterity modifier is added to the attack roll instead of the Strength modifier.
There is also one other common attack, a touch attack. Most often used as part of a combat spell, these attacks need only make contact, not penetrate armor, so most bonuses to armor class due to having armor are ignored. Only those bonuses that make make it easier to evade the touch are useful. Like normal attacks, they come in both melee and ranged version, using Strength modifier and Dexterity modifier, respectively.
If the attack total meets or exceeds the opponent's armor class or combat maneuver defense, then the attack succeeds. Effects are applied, including damage, on a successful attack roll. An attack roll always succeeds when the die result is 20 (before modifiers) and always fails if it is 1 (before any modifiers), so there is always at least a 5% chance to hit or miss, regardless of anything else.
Attack rolls are further modified by bonuses such as circumstance, competence, enhancement, insight, luck, moral, profane, size, and sacred. Attacks receive a +2 flanking bonus when at least two players attack that same target with melee weapons. Attack rolls are also affected by conditions such as blinded, dazzled, entangled, flanking, grappled, prone, sickened, or shaken.
While similar in idea, combat maneuvers have a different mechanisms. Consult their article for more details.
Damage[editedit source]
Melee weapon damage is based on the roll of the weapon's damage die plus the character's strength modifier. When using a two-handed weapon, one and a half times the strength modifier is used instead. Secondary weapon attacks from secondary natural weapons and weapons held in the off-hand only apply half of the strength modifier.
Defense[editedit source]
There are a variety of combat defenses, depending on the nature and source of the attack.
Armor Class, also known as AC, represents how hard it is for opponents to land a damaging blow on the target. It’s the minimum attack roll result that a character needs to hit. Armor class is split into three variations, based on the nature of the attack. The standard armor class is used against basic attacks and encompasses bonuses from all sources. Flat-footed AC is the defense value a target has when they are denied the ability to evade an attack, such as being unaware of the assault, sleeping, or entangled by a rope. Touch AC is used when the attack does not need to pierce the target's physical protections to damage or otherwise take effect.
Saving throws represent a character's ability to reduce or prevent the effects spells and special abilities. The subject rolls a d20 and adds their saving throw bonus. If the saving throw result is at least the DC of the effect, then the effect is reduced or negated as described by the effect.
Damage reduction, or DR, is the amount of damage the creature ignores from normal attacks. Usually, a certain type of weapon can overcome this reduction. This information is separated from the damage reduction number by a slash. For example, DR 5/magic means that a creature takes 5 less points of damage from all weapons that are not magic. If a dash follows the slash (such as 10/-), then it always effective. Damage resistance is ineffective against any sort of energy damage, even if it is delivered with a standard attack or by an magical weapon.
Energy resistance is similar to damage reduction, except for certain types of energy. Each resistance ability is defined by what energy type it resists and how many points of damage are resisted (e.g. Fire resistance 10 reduces fire damage taken by 10). It doesn’t matter whether the damage has a mundane or magical source.
Installing mac in vmware with a dmg software. Sep 18, 2012 I have Mac OS X installation newbie questions. Can I mount DMG file to install Mac OS X cleanly and directly to VMware Fusion (v4.1.3 and v5.0.1) or do I really have to burn it to a disc? I am using a Mac Mini with updated 64-bit 10.7.4. I did not see any options to do that like I can do with ISO files in Windows' VMware Workstations. I would like to install OS X Yosemite in VMware Fusion 7.0. If I select the DMG file my university is providing, VMware is unable to boot from the DMG file. The image is a compressed DMG. Feb 03, 2016 Notes: If you use both Virtualbox and VMware, notice that installesd.dmg works with Virtualbox and installesd.iso works with VMware Category Science & Technology.
More details on these subjects can be found in their individual articles.
Special Cases[editedit source]
Critical Hits[editedit source]
When the attack d20 result, without any modifiers, is within the threat range of the weapon use, the attack then something called a critical threat is achieved. To determine the outcome, a second attack rolls is made using all the same bonuses as the first. If the second roll would hit the target, then the attack threat is said to be 'confirmed' and you achieve what's known as a critical hit. Unfortunately, it should be noted that the critical hit will still fail if the first roll, despite being in the critical threat range, would have missed the target normally.
The threat range and critical multiplier are inherent to the type of weapon used, though it can be changed sometimes through the use of special feats, abilities, or spells. Unless otherwise noted, weapons and spells have a critical threat range of 20 and a critical multiplier of 2, shorted as '20/x2'.
- Example: A standard scimitar has a threat range of 18-20 with a critical multiplier of x2. Say if the dice roll is an 18 and the attack bonus is +6. The 18 on the dice alone is enough to trigger a threat, unless the targets armor class is more than (18+6=24), which would be a miss with most other weapons. If there is a threat and a hit, then a second roll is made with the +6 bonus, and if that second roll is good enough to hit, then it's a critical hit. Note that this second roll does not have to be within the critical threat range of 18-20.
When a critical hit occurs, the weapon damage and other non-dice based bonuses are multiplied by the weapon's critical multiplier.
- Example: Our example weapon is the previously mentioned scimitar with a critical multiplier of x2, but this time it's a +1 weapon with the elemental trait of flaming which adds +1d6 fire damage. When a critical hit occurs, the standard damage of 1d6 would be calculated, and the attackers Strength bonus and +1 enhancement bonus would be added, and the result would be multiplied by the scimitar's x2 critical multiplier. Only then would any extra dice of damage, such as the +1d6 flaming damage or any sneak attack dice, be added, and it would not be multiplied.
Combat Maneuvers[editedit source]
Combat Maneuvers are special attacks and tricks that have additional effects beyond pure damage. See Combat Maneuvers for a detailed explanation.